WIP Land speeder
Got a vacation coming up and decided to start a new project. The land speeder comes with a few different options and not to limit my self by gluing all the parts together I decided to magnetize the different part. After some searching on Google I found a really good guide over at †Talonstrike†.
I made a few alteration from the original guide.
Then I used a 3mm drill to make the hole large enough for the magnets. I then glued the a 3mm magnet to the gun mount.
When it was dry I attached a second magnet to the magnet I glued on the mount. Put some glue into the hole on the gun and fitted it to the magnets, then turned it carefully to detach it.
I then glued the magnets into place, now comes the tricky part. To get the arms attached to the torso correctly. I did this by attaching one of the guns to the arms. Pinned the torso to the seat and dry fitted everything else. Then applied glue to where the arms fit on the torso and then put the gun with the arms in place carefully to attach the arms to the torso.
The sides followed †Talonstrike† guide on how to magnetize a land speeder. Basically build up an inner wall for the doors, Fit and glue the magnets on the inside of the wall. Make sure to dry fit them first to get a good position. I used 5mm magnets for this.
Remove the hinges and the inner part of the missile launcher doors.
When you have glued the magnets on the inside of the built up wall, put another magnet on the outside, it will align up automatically with the inner magnet. Put some glue on the door and on the outside magnet, fit the door and wait for the glue to dry. Remove the door and magnet should have stuck to the door.
You can now strengthen the hold of the magnets by adding some green stuff around them.
We now have a fully customizable land speeder with the weapons of choice.
The torsos and the top part of the land speeded is not glued and will be painted before I glue them in place.